News

Published on: 03.12.2020

Innovations for the modular concept

Published on: 26.11.2020

Christmas and New Year’s opening times

The holidays are about to begin. This means that our employees will also be spending time with their loved ones. To stay informed on when we are open between Christmas and New Year’s, you will find our opening hours from the end of December until the beginning of January here.

Published on: 17.11.2020

Everything you need to know about gas springs: part 1

In the first part of our series ‘Everything you need to know about gas springs’, we provide general information, such as which one is suitable for which application or a comparison with conventional system compression springs.

Published on: 12.10.2020

FH configurator update

With our mould making update, we also added innovations for the configurator of FH hot runner moulds. We considerably expanded our range of nozzles as well as the selection of plastic materials.

Published on: 12.10.2020

Cooling items with NPT-thread

From November, the fittings and the screw plugs for mould temperature regulation are also available with american NPT-threads.

Published on: 08.10.2020

NX tool

In cooperation with our customer Schmidt WFT, we have developed a CAD tool,
which is now available to you free of charge.

Published on: 08.09.2020

Creating a habitat for bees

The bee is one of the most important organisms in our ecosystem. Its extinction would have tremendous consequences for the Earth. We as a community can come together to prevent this from happening and we have already taken steps towards this cause.

Published on: 11.08.2020

O-ring seals – in perfect shape, part 3

In addition to the correct selection of O-ring seals, the correct introduction of the O-ring groove is essential for the optimum sealing result. In the third part of our series ‘O-ring seals – in perfect shape’ we show you how you can save time during production with our countersink for O-ring seals, and increase the quality of the O-ring groove at the same time.

Published on: 21.07.2020

O-ring seals - in perfect shape, part 2

In the second part of our series ‘O-ring seals – in perfect shape’ we show you what to consider when planning and designing the O-ring seal groove.

Published on: 21.07.2020

Meusburger expands its range of standard elements

In the area of clamping elements, in addition to the standard horizontal toggle clamps, the range is supplemented with a reinforced version. The HWS 201 clamping elements have a more robust design and components can be clamped with higher retaining forces. This makes them particularly suitable for fast clamping in series production.

Published on: 30.06.2020

O-ring seals - in perfect shape, part 1

In this first part, we explain the different sealing types, installation options and materials of O-rings especially for mould making.

Published on: 04.06.2020

Material grade 1.2738 TSHH now available from stock

Reducing processing time and optimising costs is especially important for injection moulds with moderate shot weights. In addition, flawless surface quality is often required for injection moulded parts. 1.2738 TSHH steel has long been established on the market for this purpose. This steel is especially useful in the automotive industry, but also for consumer goods.

Published on: 30.04.2020

Expansion of plate thicknesses

In the recent product update, we were able to expand our range of plates and bars to more than 1,300 dimensions. In addition to numerous expansions, over 300 thicknesses were introduced for the first time for the material grades 1.1730, 1.2085 and 1.2312.

Published on: 26.03.2020

Fully stocked warehouse thanks to in-house production

Especially now, it is particularly important to have a reliable partner at your side that you can count on. A full raw material warehouse, the largest central standard parts warehouse and also a high degree of in-house production ensures that we can continue to supply you with all the products you need.

Published on: 19.03.2020

Our opening hours over Easter

Easter is just around the corner and in Austria the children are excited about searching for colourful Easter eggs hidden inside and outside. As not only the traditions but also the public holidays can be different depending on the country and region, we would like to keep you informed of our opening days over this period.

Published on: 06.02.2020

Always up to date with CADClick

CADClick is available in the Meusburger shops, both online and offline, as a strong, consistent, and always innovative CAD connection.

Published on: 14.01.2020

New features in the Meusburger shops

In addition to a completely new look for the shop start pages for mould making, die making and machine and jig construction, the update at the turn of the year also brought technical innovations. In particular, new functions have been added to the wizard for stamping and forming die sets and the configurator for hot runner moulds. See the changes for yourself!

Published on: 14.01.2020

2019 year in review

The last year had so much to offer: interesting product innovations, exciting events, big changes in the company and many great times with our customers. Thank you!

Published on: 20.12.2019

Meusburger joins forces in 2020

Our goal is to support you in your daily work to guarantee you efficient mould making. Since the takeover of PSG in 2016, we have been working very closely with the hot runner and control systems specialist. To offer you further advantages, we will fully integrate PSG in our company during 2020. This way we can combine and develop our extensive know-how even better for you under one brand: the Meusburger corporate brand.

Published on: 12.12.2019

Our versatile systems for demoulding

Our extensive range of demoulding products includes many tried and trusted items such as two-stage ejectors, components for controlling 3-plate moulds, and different demoulding aids.

Published on: 10.12.2019

What a great event

Thank you for all the visits to our stand, the great technical discussions and the good times together. We are always pleased to welcome so many interested visitors to our stand at the Blechexpo in Stuttgart. We have collected a few impressions of the trade fair for you featuring our SB stamping and forming die set.

Published on: 10.12.2019

Our ejectors for highest temperatures

When things are starting to heat up, our ejectors made of high-speed steel are just what you need. Thanks to their high-temperature resistance, they are ideally suited for use at high mould temperatures. Additionally, the E 17003 and E 17103 ejectors offer a long service life thanks to their low wear and high hardness of ~64HRC.

Published on: 09.12.2019

New sizes and diameters

We have expanded our range of ready-to-use E 5300 spacers and E 5302 spacer discs. Discover the numerous new sizes and diameters now.

Published on: 14.11.2019

Compact cylinder for proximity sensor

Our tried and trusted compact cylinder with adjustable proximity sensors is now also available with an O-ring port. Find out more about this product and our entire range of hydraulic systems!

Published on: 05.11.2019

Double the know-how

The good cooperation between Meusburger and Bihler has resulted in two newly developed stamping and forming die sets for the Bihler stamping and forming machines. Standardisation in particular has numerous advantages − but what exactly are they?

Published on: 15.10.2019

Digital tips: the ejector configurator

We are launching a new video series about our wizards and configurators. The first is our configurator for ejectors. Learn about all its functions and features.

Published on: 27.08.2019

For more control and efficiency

True to our motto ‘everything from one source’, we not only have standard parts for temperature and end position control, but also offer sensors for cavity pressure measurement in our range. Stay in control and improve your part quality.

Published on: 26.08.2019

CADClick 3D data for die making

Save time during the design process and configure selected components for die making directly in our offline shop or web shop. You can immediately export the customised 3D data and load it into your projects. Find further information and the individual products here.

Published on: 27.06.2019

Solutions for high temperatures

If it gets hot in your mould base, you need temperature regulation components that withstand the temperatures. We have put together a range of products for high temperature applications for you.

Published on: 28.05.2019

Maintenance-free and smooth running

Once installed, you don't need to worry about our bronze flat guiding stock with graphite inserts at all. As part of a comprehensive expansion, we have added several new dimensions to our range. Depending on your requirements, the flat guiding stock is available with and without screw holes.

Published on: 23.05.2019

Directly configurable CADClick 3D data

Save time during the design and configure selected components directly in our offline shop or web shop. You can immediately export the customised 3D data and load it into your projects. Here you will find further information and the individual products.

Published on: 03.05.2019

Innovative bending unit for optimal results

Are you particularly interested in obtaining the highest surface quality in bending processes? The E 5690 Bending unit TRIBMATE® EASY ROLLA™ exclusively available at Meusburger reduces follow-up operations to a minimum due to rolling friction! In addition, the free bearing rollers provide for unlimited stroke.

Published on: 26.02.2019

Keep it flexible

Nobody wants downtimes. To avoid having these due to unnecessary or damaged cavities, you can guide the flow channel with the sprue adjuster. The sprue adjuster can be actuated directly from the split line face.

Published on: 31.01.2019

Our new products for your temperature regulation

Meet our new temperature regulation elements for the ‘Standard’ and ‘USA’ systems. Save time with our components for your mould bases.

Published on: 01.02.2019

Don’t waste any time

Save yourself the enquiry process for ejectors cut to length and configure them directly in our web shop. Our new configurator is intuitive to use and you immediately receive the CAD data of your individual ejector.

Published on: 31.01.2019

Over 7,000 new products - you have the choice

In the past year, a lot has happened throughout our entire product range. Compared to the previous year, there are over 7,000 new products and additions. Why so many? To offer you the best selection.

Published on: 04.01.2019

Components made from stainless steel

We have expanded our range of stainless steel components in many areas for you. Especially during the processing of plastics with corrosive properties or for use in clean rooms, you can benefit from the advantages of stainless steel.

Published on: 04.01.2019

Working together for the customers

When we talk about sales, we don’t just mean the many field sales representatives. Behind them is a big team - from sales management to the internal sales department - who together with the field sales representatives are always happy to assist you.

Published on: 22.11.2018

The Plastics Industry Awards 2018

This year we were pleased to support the British ‘Plastics Industry Awards’ as the sponsor of a gold award, and award the company RJG Technologies with the prize in the category ‘Best Business Initiative of the Year’. Learn more about the event here.

Published on: 09.11.2018

Special award for Georg Meusburger

Our company founder Georg Meusburger was awarded the ‘Vorarlberg Honorary Prize for Entrepreneurial Lifework’ by the Vorarlberg Economic Forum (AT).