CADClick 3D data for die making

In our web and offline shop you can configure your 3D data for selected products directly with CADClick. Simply place the desired item in your parts list, tick the 'CAD' box and click on the 'CAD transfer' button at the bottom right of the page. Then a query window opens and you can start the configuration.

Components with configurable min./max. values

Values in-between the predefined minimum and maximum limits can be specified for the following products.

Active parts for die making 

E 5620 Infeed guide, adjustable width, spring-loaded on one side Entry of the strip width

E 5622 Infeed guide, adjustable width, fixed on both sides Entry of the strip width

E 5660 Adjustment unit Entry of the position of the wedge

Gas springs

Entry of the stroke

Spring plungers

Mini

Standard

Force

Force extreme

Compact

Selection aid for gas springs

Mini, Standard, Force or Compact?

Sometimes the choice is not so easy. However, so that you can find the right gas spring for your project, we have a special election aid ready for you. Enter the required parameters and let the wizard show you the matches.

Try it now

System compression spring

Entry of the installation lengths in the compressed state

light
green

for very light load

E 1541 maximum deflection: 50% of L0

green

for light
load

E 1536 maximum deflection: 50% of L0 E 1542 maximum deflection: 40% of L0

blue

for medium load

E 1537 maximum deflection: 40% of L0 E 1543 maximum deflection: 37.5% of L0

red

for heavy
load

E 1538 maximum deflection: 30% of L0 E 1544 maximum deflection: 30% of L0

yellow

for very heavy load

E 1539 maximum deflection: 20% of L0 E 1545 maximum deflection: 25% of L0

silver

for extra heavy load

E 1546 maximum deflection: 15% of L0

A hírek áttekintéséhez